Turning or changing blades
Before carrying out any maintenance and cleaning work, switch off the machine, disconnect the mains plug and wait until the blades have come to a standstill.
There is a risk of injury and death from electric shock, fire and rotating blades.
1 Ensure that the mains cable is disconnected from the mains.
2. release the housing lock.
3. tilt the front housing section of the chipper forwards. You can remove it completely and put it to one side so that you have free access to the blades. To do this, release the housing lock and remove the front housing section vertically upwards.
4 Block the blade plate with a screwdriver (not included in the scope of delivery), for example. Insert the screwdriver through the access hole and carefully turn the blade plate until you reach one of the two blocking holes. You can now insert the screwdriver through the blade plate to block it. 5.
5. you can use the hexagon socket spanner to loosen the two screws and remove the blade.
To fit the blade, be sure to use new screws and tighten them to a torque of 16 Nm using a torque spanner.
The housing lock must then be screwed tight again and hand-tightened, otherwise the machine cannot be started later.
Translated with DeepL.com (free version)